Radius-Server Retransmit; Radius-Server Timeout; Show Radius-Server - SMC Networks TigerStack II SMC8926EM Management Manual

25
User Authentication Commands

radius-server retransmit

This command sets the number of retries. Use the no form to restore the default.
Syntax
radius-server retransmit number_of_retries
no radius-server retransmit
number_of_retries - Number of times the switch will try to authenticate
logon access via the RADIUS server. (Range: 1 - 30)
Default Setting
2
Command Mode
Global Configuration
Example
Console(config)#radius-server retransmit 5
Console(config)#

radius-server timeout

This command sets the interval between transmitting authentication requests to the
RADIUS server. Use the no form to restore the default.
Syntax
radius-server timeout number_of_seconds
no radius-server timeout
number_of_seconds - Number of seconds the switch waits for a reply
before resending a request. (Range: 1-65535)
Default Setting
5
Command Mode
Global Configuration
Example
Console(config)#radius-server timeout 10
Console(config)#

show radius-server

This command displays the current settings for the RADIUS server.
Default Setting
None
Command Mode
Privileged Exec
25-8