Figure 6-7 Ssh Server Settings - SMC Networks TigerStack II SMC8926EM Management Manual

• SSH Server-Key Size – Specifies the SSH server key size. (Range: 512-896 bits;
Default: 768)
- The server key is a private key that is never shared outside the switch.
- The host key is shared with the SSH client, and is fixed at 1024 bits.
Web – Click Security, SSH, Settings. Enable SSH and adjust the authentication
parameters as required, then click Apply. Note that you must first generate the host
key pair on the SSH Host-Key Settings page before you can enable the SSH server.
CLI – This example enables SSH, sets the authentication parameters, and displays
the current configuration. It shows that the administrator has made a connection via
SHH, and then disables this connection.
Console(config)#ip ssh server
Console(config)#ip ssh timeout 100
Console(config)#ip ssh authentication-retries 5
Console(config)#ip ssh server-key size 512
Console(config)#end
Console#show ip ssh
SSH Enabled - version 2.0
Negotiation timeout: 120 secs; Authentication retries: 3
Server key size: 768 bits
Console#show ssh
Information of secure shell
Session Username Version Encrypt method Negotiation state
------- -------- ------- -------------- -----------------
0 admin
Console#disconnect 0
Console#

Figure 6-7 SSH Server Settings

2.0 cipher-3des
Configuring the Secure Shell
session-started
6
25-17
25-18
25-19
25-19
25-22
25-22
23-24
6-15