Router Ospf - SMC Networks TigerStack II SMC8926EM Management Manual

Table 42-8 Open Shortest Path First Commands (Continued)
Command
Display Information
show ip ospf
show ip ospf
border-routers
show ip ospf database
show ip ospf interface
show ip ospf neighbor
show ip ospf
summary-address
show ip ospf virtual-links Displays parameters and the adjacency state of virtual links

router ospf

This command enables Open Shortest Path First (OSPF) routing for all IP interfaces
on the router and enters router configuration mode. Use the no form to disable
OSPF.
Syntax
[no] router ospf
Command Mode
Global Configuration
Default Setting
Disabled
Command Usage
OSPF is used to specify how routers exchange routing table information.
Example
Console(config)#router ospf
Console(config-router)#
Related Commands
network area (42-26)
Function
Displays general information about the routing processes
Displays routing table entries for Area Border Routers (ABR) and
Autonomous System Boundary Routers (ASBR)
Shows information about different LSAs in the database
Displays interface information
Displays neighbor information
Displays all summary address redistribution information
Open Shortest Path First (OSPF)
42
Mode Page
PE 42-39
PE 42-40
PE 42-41
PE 42-49
PE 42-50
PE 42-51
PE 42-51
42-19