40
Router Redundancy Commands
Field
Description
Interface
VLAN interface
Grp
VRRP group
State
VRRP role of this interface (master or backup)
Virtual addr
Virtual address that identifies this VRRP group
Int
Interval at which the master virtual router advertises its role as the master
Pre
Shows whether or not a higher priority router can preempt the current acting master
Prio
Priority of this router
show vrrp interface
This command displays status information for the specified VRRP interface.
Syntax
show vrrp interface vlan vlan-id [brief]
• vlan-id - Identifier of configured VLAN interface. (Range: 1-4093)
• brief - Displays summary information for all VRRP groups on this router.
Defaults
None
Command Mode
Privileged Exec
Example
This example displays the full listing of status information for VLAN 1.
Console#show vrrp interface vlan 1
Vlan 1 - Group 1,
State
Virtual IP Address
Virtual MAC Address
Advertisement Interval
Preemption
Min Delay
Priority
Authentication
Authentication Key
Master Router
Master Priority
Master Advertisement Interval
Master Down Interval
Console#
* Refer to "show vrrp" on page 40-6 for a description of the display items.
40-8
Table 40-4 show vrrp brief - display description
Master
192.168.1.6
00-00-E3-11-10-10
5 sec
enabled
10 sec
1
SimpleText
bluebird
192.168.1.6
1
5 sec
15
Need help?
Do you have a question about the TigerStack II SMC8926EM and is the answer not in the manual?
Questions and answers