Example
Console#show lldp info remote-device
LLDP Remote Devices Information
Interface | ChassisId
--------- + ----------------- ----------------- ---------------------
Eth 1/1
| 00-01-02-03-04-05 00-01-02-03-04-06
Console#show lldp info remote-device detail ethernet 1/1
Chassis Type
Chassis Id
PortID Type
PortID
SysName
SysDescr
PortDescr
SystemCapSupported : Bridge, Router
SystemCapEnabled
Remote Management Address :
192.168.0.5 (IPv4)
Remote Port VID : 1
Remote Port-Protocol VLAN :
VLAN-1 : supported, disabled
Remote VLAN Name :
VLAN-1 : DefaultVlan
Remote Protocol Identity (Hex) : 88-CC
Remote MAC/PHY configuration status :
Remote port auto-neg supported : Yes
Remote port auto-neg enabled : Yes
Remote port auto-neg advertised cap (Hex) : 6C01
Remote port MAU type : 30
Remote Link Aggregation :
Remote link aggregation capable : Yes
Remote link aggragation enable : No
Remote link aggragation port id : 0
Remote Max Frame Size : 1522
Console#
PortId
: MAC Address
: 00-00-E8-90-00-00
: MAC Address
: 00-00-E8-90-00-01
:
: 24/48 port 10/100/1000 Stackable Managed Switch
with 2 X 10G uplinks
: Ethernet Port on unit 1, port 1
: Bridge, Router
show lldp info remote-device
SysName
32
32-17
Need help?
Do you have a question about the TigerStack II SMC8926EM and is the answer not in the manual?
Questions and answers