Macro Photograph)/.Dl - Contax TVS DIGITAL Instruction Manual

2. Macro Photography
Use the macro mode to capture subjects that are at a distance (') of 0.6 to 0.15 m. Use auto focus
to focus the subject. ('Distance from the CCD)
• Set the zoom position to wide-angle in the macro mode.
I
Set the mode dial to "P" or "Av" and turn
on the camera.
2
Press the "A /MF" button to display "A"
on the LCD monitor.
This completes all the settings.
Each press of the "A /MF" button changes the settings
as follows: normal AF "No indication" -• Macro AF ''ij5"
-» Manual Focus "MF" (and back).
• The flash mode Is set to (Flash-off).
• The macro setting is canceled when the camera is turned off.
3
Approach the subject, compose the picture
in the LCD monitor and press the shutter
release button halfway down.
When the subject is in focus, the in-focus indicator "o"
lighis-
• The standby LED (Greer) lights to indicate that the subject is
in focus.
Check that
"o"
is lit and take the picture.
• Use the LCD monitor for taking photographs in the macro mode. The optical viewfinder shows an image that
differs widely from the image that you actually capture.
• The flash can be fired with the " button in the macro mode. However, smoe the subject is too close to be
within adjustable range, use flash exposure compensation and make test shots to find the right exjyosure.
• The shooting area when closest to the subject is about 76 mm x t02 mm. (Shooting distance: 0.15 m)
41