Boot Manual - Cisco Catalyst 3560X-24P Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

boot manual

Use the boot manual global configuration command on a standalone switch to enable manually booting
the switch during the next boot cycle. Use the no form of this command to return to the default setting.
Syntax Description
This command has no arguments or keywords.
Defaults Manual booting is disabled.
Command Modes Global configuration
Command History Release
12.2(53)SE2
Usage Guidelines This command works properly only from a standalone switch in a stack.
The next time you reboot the system, the switch is in boot loader mode, which is shown by the switch:
prompt. To boot up the system, use the boot boot loader command, and specify the name of the bootable
image.
This command changes the setting of the MANUAL_BOOT environment variable. For more
information, see
Related Commands Command
show boot
OL-21522-02
boot manual
no boot manual
Modification
This command was introduced.
Appendix A "Catalyst 3750-X and 3560-X Switch Boot Loader Commands."
Description
Displays the settings of the boot environment variables.
Catalyst 3750-X and 3560-X Switch Command Reference
boot manual
2-75