Clear L2Protocol-Tunnel Counters - Cisco Catalyst 3560X-24P Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

clear l2protocol-tunnel counters

Use the clear l2protocol-tunnel counters privileged EXEC command on the switch stack or on a
standalone switch to clear the protocol counters in protocol tunnel ports.
Note This command is not supported on switches running the LAN base feature set.
Syntax Description interface-id
Defaults
No default is defined.
Command Modes Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines
Use this command to clear protocol tunnel counters on the switch or on the specified interface.
Examples This example shows how to clear Layer 2 protocol tunnel counters on an interface:
Switch# clear l2protocol-tunnel counters gigabitethernet1/0/3
Related Commands Command
show l2protocol-tunnel
OL-21522-02
clear l2protocol-tunnel counters [interface-id]
(Optional) Specify the interface (physical interface or port channel) for
which protocol counters are to be cleared.
Modification
This command was introduced.
Description
Displays information about ports configured for Layer 2 protocol
tunneling.
Catalyst 3750-X and 3560-X Switch Command Reference
clear l2protocol-tunnel counters
2-101