Cisco Catalyst 3560X-24P Command Reference Manual page 110

boot system
When you enter the boot system switch number or the boot system switch all command on the stack
master, the stack master checks if a software image is already on the stack member (except on the stack
master). If the software image does not exist on the stack member (for example, stack member 1), an
error message like this appears:
%Command to set boot system switch all xxx on switch=1 failed
When you enter the boot system switch number command on the stack master, you can specify only one
stack member for the number variable. Entering more than one stack member for the number variable is
not supported.
If you are using the archive download-sw privileged EXEC command to maintain system images, you
never need to use the boot system command. The boot system command is automatically manipulated
to load the downloaded image.
This command changes the setting of the BOOT environment variable. For more information, see
Appendix A "Catalyst 3750-X and 3560-X Switch Boot Loader Commands."
Related Commands Command
show boot
Catalyst 3750-X and 3560-X Switch Command Reference
2-78
Chapter 2
Description
Displays the settings of the boot environment variables.
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02