Cisco Catalyst 3560X-24P Command Reference Manual page 156

cluster member
Examples This example shows how to add a switch as member 2 with MAC address 00E0.1E00.2222 and the
password key to a cluster. The cluster command switch adds the candidate to the cluster through
VLAN 3.
Switch(config)# cluster member 2 mac-address 00E0.1E00.2222 password key vlan 3
This example shows how to add a switch with MAC address 00E0.1E00.3333 to the cluster. This switch
does not have a password. The cluster command switch selects the next available member number and
assigns it to the switch that is joining the cluster.
Switch(config)# cluster member mac-address 00E0.1E00.3333
You can verify your settings by entering the show cluster members privileged EXEC command on the
cluster command switch.
Related Commands Command
show cluster
show cluster candidates
show cluster members
Catalyst 3750-X and 3560-X Switch Command Reference
2-124
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Description
Displays the cluster status and a summary of the cluster to which the
switch belongs.
Displays a list of candidate switches.
Displays information about the cluster members.
OL-21522-02