Safety Of Machinery, Safety-Critical Applications; Electromagnetic Compatibility (Emc); Copyright - Control Techniques Nidec SI-EtherCAT User Manual

Automatic start
Some parameter settings may cause the motor to start unexpectedly.
Restore default parameter set
Depending on the application, this may cause unpredictable or hazardous operation.
1.9

Safety of machinery, safety-critical applications

Within the European Union all machinery in which this product is used must comply with Machinery
Directive 2006/42/EC.
The design of safety-related control systems must only be done by personnel with the required
training and experience. The Safe Torque Off function will only ensure the safety of a machine if it is
correctly incorporated into a complete safety system. The system must be subject to a risk
assessment to confirm that the residual risk of an unsafe event is at an acceptable level for the
application.
1.10

Electromagnetic compatibility (EMC)

The product is designed to comply with international standards in a typical installation. Installation
instructions are provided in the Power Installation Guide and EMC data sheet. If the installation is
poorly designed or other equipment does not comply with international standards for EMC, the
product might cause or suffer from disturbance due to electromagnetic interaction with other
equipment. It is the responsibility of the installer to ensure that the equipment or system into which
the product is incorporated complies with the relevant EMC legislation in the country of use.
Within the European Union, equipment into which this product is incorporated must comply with the
Electromagnetic Compatibility Directive 2014/30/EU.
1.11

Copyright

The contents of this publication are believed to be correct at the time of printing. In the interests of a
commitment to a policy of continuous development and improvement, the manufacturer reserves
the right to change the specification of the product or its performance, or the contents of the guide,
without notice.
All rights reserved. No parts of this publication may be reproduced or transmitted in any form by any
means, electrical or mechanical including photocopying, recording or by an information storage or
retrieval system, without permission in writing from the publisher.
SI-EtherCAT User Guide
9