Control Techniques Nidec SI-EtherCAT User Manual page 151

Table 9-78 Object Subindex view Selector 2
S.09.054 Object Subindex view Selector 2
Minimum 0
Default 0
Type 8 bit volatile
Display Format Standard
Coding RW, NC, PT
This parameter selects a CAN Object Subindex to view in Object View Value 2 (S.09.055).
Table 9-79 Object View Value 2
S.09.055 Object View Value 2
Minimum -2147483648
Default
Type 32 bit volatile
Display Format Standard
Coding RO, ND, NC, PT
This parameter shows the value of object view selector 2.
Table 9-80 Object Index view Selector 3
S.09.056 Object Index view Selector 3
Minimum 0
Default 0
Type 16 bit volatile
Display Format Standard
Coding RW, NC, PT
This parameter selects a CAN Object Index to view in Object View Value 3 (S.09.058). The CAN
Object Subindex also need to be configured in Object Subindex View Selector 3 (S.09.057).
Setting a value of zero will freeze the value in S.09.058, to that for the previous object selected.
Table 9-81 Object Subindex view Selector 3
S.09.057 Object Subindex view Selector 3
Minimum 0
Default 0
Type 8 bit volatile
Display Format Standard
Coding RW, NC, PT
This parameter selects a CAN Object Subindex to view in Object View Value 3 (S.09.058).
SI-EtherCAT User Guide
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
255
Written in background
0
2147483647
Written in background
0
65535
Written in background
0
255
Written in background
0
151