Programming - Sunrise Medical Quickie R-Net Control System Instructions For Use Manual

19.5 Programming (Fig 19.36)
A right deflection of the joystick will enter a sub-menu for programming user
experience functions as follows:
Sleep
Sets the time after which the control system will go to sleep if an Input Device
command is not received.
Sounder Volume
Sets the volume of the sounder used to indicate button presses.
Horn Volume
Sets the volume of the horn when used.
Start-up Beep
Sets whether a short beep occurs when the controller is turned on.
Momentary Screens
Sets whether programmed Momentary Screens are displayed.
Display Speed
Sets how the wheelchairs speed is displayed; options are mph, km/h, or off.
Displays
Sets the format of the digital drive display; options are odometer, speed, or
both.
Diagnostics
Allows the user to read diagnostic information from the control system.
Timers
Enables the user to view how many hours the chair has been driven.
EXIT
A right deflection of the joystick will exit the settings menu.
Fig 19.36
1. Module
2. Software Version
3. Trip Text
4. Occurences
Fig.19.36
1
2
247555 Rev. A
3
78
4
R-Net Control System