Deleting Ir Codes - Sunrise Medical Quickie R-Net Control System Instructions For Use Manual

IR MODE
On/Off
Channel Up
Channel Down
Volume Up
Fig.16.19
Fig.16.20
Learn Code
Delete Code
Exit
Fig.16.21
Learn Code
Delete all Codes
Exit
On/Off
Fig.16.22
247555 Rev. A
DELETE

16.6 Deleting IR Codes

To delete an IR Code for a specific command;
1. Highlight the specific command in the appliance
menu (Fig 16.19).
2. Press the right button (Fig 16.20).
3. Select the Delete Code option (Fig 16.21).
To delete all IR Codes for an appliance;
1. Select Delete All Codes from within that appliance's
sub-menu (Fig 16.22).
WARNING!
When deleting all learned codes for a specific appliance,
the Omni must be power cycled, (switch Off then On, to
actually delete the codes).
To delete all IR Codes stored in the Omni, select Delete
All Codes within the IR Set Up menu (Fig 16.23).
WARNING!
If the Delete All Codes command is selected the R-Net
must be power cycled to actually delete the codes.
Device 2
Delete all Codes
Exit
TV
Fig.16.23
56
>
>
R-Net Control System