Learning An Ir Code - Sunrise Medical Quickie R-Net Control System Instructions For Use Manual

20.5 Learning an IR Code

Refer to (Fig 20.6 to 20.11).
1. Enter the IR Set-up Menu.
2. Select an Appliance, e.g. TV – Samsung.
3. The commands for the Appliance will appear on the screen.
4. Select the command to be learned, via a right deflection of
the joystick. In this example, TV > Channel Up (Fig 20.7).
5. Select Learn Code, via a right deflection of the joystick while
the command is highlighted (Fig 20.8).
6. Point the TV remote control at the CJSM2 Receiver LED and
press the Channel Up button twice.
7. A check denotes a successful learn operation (Fig 20.10).
8. A cross denotes an unsuccessful learn operation, please
retry (Fig 20.11).
9. After the code is learned, highlight Exit and deflect the
joystick to the left. This will return the system to the Appliance
level of the IR Set-up Menu.
NOTE:
The first time an IR Code has been learned, it is necessary to
cycle the power to the CJSM2, (turn OFF and ON). If other IR
Codes are already learned, then this is not necessary.
Fig.20.6
Fig.20.7
247555 Rev. A
Fig.20.8
Fig.20.9
Fig.20.10
Fig.20.11
81 R-Net Control System