Deleting Ir Codes - Sunrise Medical Quickie R-Net Control System Instructions For Use Manual

Table of Contents

20.8 Deleting IR Codes

To delete an IR Code for a specific command, highlight the

specific command in the appliance menu and deflect the

joystick to the right. Then select the Delete Code option

(Fig 20.14).

To delete all IR Codes for an appliance select Delete All

Codes within that appliance's sub-menu (Fig 20.15).

To delete all IR Codes stored in the CJSM2, select Delete

All Codes within the IR Set-up Menu (Fig 20.16).

247555 Rev. A

Fig.20.14

Fig.20.15

Fig.20.16

R-Net Control System

Table of Contents

Do you have a question about the Quickie R-Net Control System and is the answer not in the manual?