Pc Pairing - Sunrise Medical Quickie R-Net Control System Instructions For Use Manual

Bluetooth Devices
Devices Options COM Ports Hardware
Remove
Add...
OK
Fig.18.7
Add Bluetooth Device Wizard
Fig.18.8
247555 Rev. A
Properties
Apply
Cancel
Welcome to the Add Bluetooth
Device Wizard
Before proceeding, refer to the "Bluetooth" section of the
device documentation. then set up your device so that your
computer can find it:
• Turn it on
• Make it discoverable (visible)
• Give it a name (optional)
• Press the button on the bottom of the device
(keyboards and mice only)
My device is set up and ready to be found.
Add only Bluetooth devices that you trust.
< Back
62

18.8 PC Pairing

The PC being used must have Bluetooth connectivity.
1. Enter my Bluetooth Devices on your PC.
2. The following window should appear (Fig 18.7).
3. Click on 'Add' (Fig 18.7).
4. The Bluetooth Device Wizard will open (Fig 18.8).
5. Tick the box marked "My device is set up and ready to be
found" (Fig 18.8).
6. When highlighted, click "Next" (Fig 18.8).
7. The PC will search for local Bluetooth Devices, (Fig 18.9).
8. The following screen will appear and display the locally
connectable Bluetooth devices (Fig 18.10).
9. Click on "R-Net Bluetooth Mouse Module" and then click on
"Next" (Fig 18.10).
Next > Cancel
R-Net Control System