Enabling And Disabling Ir Codes - Sunrise Medical Quickie R-Net Control System Instructions For Use Manual

Fig.16.14
IR MODE
On/Off
Channel Up
Channel Down
Volume Up
Fig.16.15
Fig.16.16
IR MODE
On/Off
Channel Up
Channel Down
Volume Up
Fig.16.17
247555 Rev. A
9. When the first code has been successfully loaded,
10. The successfully learned code will now have a
11. Follow steps 4 to 8 for the remaining codes for
If you choose another appliance, after the first code
you load, switch On and Off, then carry on loading
the codes for the new appliance without interrupting
the power.

16.5 Enabling and Disabling IR Codes

IR codes can be enabled or disabled in the IR Set Up
menu. If a code is disabled it will not transmit and will
not appear in the User Menu.
√
1. To disable an IR code, select the – key on the front
2. A disabled IR codes appears with an X against the
3. To enable an IR code, select the +key on the front
4. An enabled code appears with a check against the
ENABLE
DISABLE
√
X
√
√
Fig.16.18
55
press the On/Off button to turn the Omni Off then
On (Fig 16.14).
check mark next to it (Fig 16.15).
that appliance. There is no need to switch On and
Off for the rest of the codes for that appliance.
WARNING!
panel of the Omni (Fig 16.16).
highlighted Command (Fig 16.17).
panel of the Omni (Fig 16.16).
highlighted Command (Fig 16.18).
IR MODE
On/Off
Channel Up
Channel Down
Volume Up
√
√
√
√
R-Net Control System