Naming The Stereo Out And Bus Outs - Yamaha 01V96i Reference Manual

Naming the Stereo Out
and Bus Outs
You can change the default Bus names (BUS1, AUX4, STE-
REO, etc.). It may be convenient to name the buses "Monitor
Out" or "Effect Send, " for example, so that you can easily iden-
tify the signal type.
1.
Press the DISPLAY ACCESS [PATCH] button
repeatedly until the Patch | Out Name page
appears.
1
You can specify Short names in the center column (
and Long (full) names in the right column (
When the Name Input Auto Copy check box (
the first four characters of a newly-entered Long name are
automatically copied to the Short name. On the other
hand, a newly-entered Short name is automatically added
to the beginning of the Long name.
You can reset all bus names to their default names by
moving the cursor to the INITIALIZE button, then press-
ing [ENTER].
2.
Move the cursor to a name you wish to
change, then press [ENTER].
The Title Edit window appears, which enables you to edit
the name.
3.
Edit the name, move the cursor to the OK but-
ton, then press [ENTER].
The new name is now effective.
Tip: The edited name is stored in the Output Patch library.
3
2
1
)
2
).
3
) is on,

Naming the Stereo Out and Bus Outs

35
01V96i—Reference Manual