Output Patch Library
The Output Patch library enables you to store and recall all Output Patch settings. The
library contains one preset memory and 32 user (readable & writable) memories.
To access the Output Patch library, press the DISPLAY ACCESS [PATCH] button repeatedly
until the Patch | Out LIB page appears.
For details on storing and recalling memories, see "General Library Operation" on
page 171.
The Output Patch preset memory #0 contains the following settings:
Slot output channels 1–8
Slot output channels 9–16
ADAT OUT channels 1–8
OMNI OUT connectors 1–4
Effects Library
The Effects library enables you to store and recall Effects processor 1–4 programs. The
library contains 44 preset programs and 84 user (readable & writable) programs.
Note: The Effects library is shared by Effects processors 1–4. However, only Effects processors
1 and 2 enable the recall of Effect 19 "HQ Pitch" and Effect 42 "Freeze."
To store and recall settings to and from the library, you must locate the corresponding
Effects processor's page.
To access the Effects library, press the DISPLAY ACCESS [EFFECT] button repeatedly until
the library page for the desired Effects processor appears.
Each Effects processor features the library pages listed below:
• Internal Effects Processor 1 Library............FX1 Lib page
• Internal Effects Processor 2 Library............FX2 Lib page
• Internal Effects Processor 3 Library............FX3 Lib page
• Internal Effects Processor 4 Library............FX4 Lib page
Using Libraries
Bus Outs 1–8
Bus Outs 1–8
Bus Outs 1–8
Aux Outs 1–4
01V96—Owner's Manual
175
16