Reading Displays - Omron ZX-E Operation Manual

Reading Displays

The data displayed on the main and sub-displays depends on the mode currently
selected. When the power is first turned ON after shipment, RUN mode data is dis-
played.
Main display
Sub-display
Mode Main Display
RUN Displays the measured value
(the value after measurement
conditions have been reflected.)
For example, when the hold func-
tion is set, the held value will be
displayed.
T Displays the measured value
(the value after the measurement
conditions have been reflected).
For example, when the hold func-
tion is set, the held value will be
displayed.
FUN Displays the function names in
order when the Control Keys are
pressed.
Function Transition Charts, p. 51
Alphabet Display Format
The alphabet appears on the main and sub-displays as shown in the following table.
Sub-display
Changes between displaying the present value (actual mea-
sured value), threshold value, output value, and resolution in
order when the Control Keys are pressed.
Threshold Value Display
Displays either the HIGH or LOW threshold value, depending
on the position of the threshold switch.
The monitor focus setting determines whether the value is
output as voltage or current.
Output Settings (Monitor Focus), p. 103
Displays the threshold value for the threshold being set.
Displays either the HIGH or LOW threshold value, depending
on the position of the threshold switch.
Displays the setting for the function displayed on the main dis-
play.
Section 3
BASIC OPERATION
ZX-E
Operation Manual
47