Section 3
BASIC OPERATION
Key Operations
Use the Control Keys to change the display and set measurement conditions.
The mode currently selected determines the key functions.
Switching Modes, p. 46
Key
LEFT Key
RIGHT Key
Cursor
Keys
UP Key
DOWN Key Resets input.
ENT Key
ZX-E
48
Operation Manual
RUN Mode
Changes sub-display
Used when selecting
content.
numeral digits.
Performs timing input.
Used when changing
numerals.
Performs zero reset.
Function changes depend-
ing on operation.
• Confirms threshold value.
• Executes teaching.
Control Keys
Function
T Mode
Function changes depend-
ing on setting.
• Switches function display.
• Selects numeral digit.
• Stops setting.
Function changes depend-
ing on setting.
• Switches between
selections.
• Changes numerals.
Confirms the set condition or
value.
FUN Mode