Omron ZX-E Operation Manual page 160

APPENDICES
Display
D
(*) D-FWD
(*) D-INV
(*) DOWN
(*) DISP
E
(*) ETC
F (*) FE
H
I
K (*) KEEP
L
M (*) MAX
O (*) OFF-D
(*) ON-D
ZX-E
158
Operation Manual
D000 Linearity adjustment value input at 0% of measurement distance position
D050 Linearity adjustment value input at 50% of measurement distance position p. 56
D100 Linearity adjustment value input at 100% of measurement distance posi-
tion
Display direction for measured values when scaling function used (display
not inverted)
Display direction for measured values when scaling function used (display
inverted)
DIGIT Number of digits setting for main and sub-displays
Hold/Trigger mode/Self-down trigger
DREV Reverses position of main and sub-displays.
Displays display-related functions from special menu.
ECO Reduces power consumption by reducing main and sub-display lighting.
Displays functions other than display- and output-related functions from
special menu.
Linearity adjustment/Sensing object material/Iron, Stainless steel
(SUS410)
FOCUS Measured value output range setting
H-DLY Hold/Delay hold
H-D-T Hold/Delay hold/Delay time setting
H-HYS Hold/Trigger mode/Self-trigger hysteresis width setting
H-LVL Hold/Trigger mode/Self-trigger level setting
H-S-T Hold/Delay hold/Sampling period setting
H-TRG Hold/Trigger mode setting
HOLD Hold setting
HYS Hysteresis width setting
INIT Initialization of settings
Non-measurement settings/Hold output
L-ADJ Linear output offset value setting
LINER Linearity adjustment
LINIT Initialization of linearity adjustment data
Non-measurement settings/Clamp value/Maximum
METAL Linearity adjustment/Sensing object material
Timer/Off-delay
Timer/On-delay
Details Pages
p. 56
p. 56
p. 90
p. 90
p. 123
p. 83
p. 124
p. 51
p. 126
p. 51
p. 54
p. 103
p. 86
p. 86
p. 83
p. 83
p. 86
p. 83
p. 81
p. 102
p. 135
p. 110
p. 107
p. 54
p. 59
p. 110
p. 54
p. 112
p. 112