Setting Delay Time
5.
Use the LEFT and RIGHT Keys to display H-
D-T on the main display.
H-D-T will not be displayed if the H-DLY function is set to
OFF.
6.
Press the UP or DOWN Key.
The leftmost digit of the sub-display will flash.
7.
Enter the delay time (ms).
8.
Press the ENT Key to confirm the setting.
The delay time will be registered.
Setting Sampling Period
9.
Use the LEFT and RIGHT Keys to display H-
S-T on the main display.
H-S-T will not be displayed if the H-DLY function is set to
OFF.
10.
Press the UP or DOWN Key.
The leftmost digit of the sub-display will flash.
11.
Use the Cursor Keys to enter the sampling
period (ms).
12.
Press the ENT Key to confirm the setting.
The sampling period will be registered.
Section 5
DETAILED SETTINGS
Move between digits.
Increment and decre-
ment the numeric value.
Move between digits.
Increment and decre-
ment the numeric value.
ZX-E
Operation Manual
87