Connections - Omron ZX-E Operation Manual

Section 2
PREPARATIONS FOR MEASUREMENT

Connections

This section describes how to connect component parts of the Smart Sensor.
Turn OFF the power supply to the Amplifier Unit before connecting or removing components. The Smart Sen-
sor may malfunction if components are connected or removed while the power is ON.
Sensor Heads
Connection Method
Push the Sensor Head connector into the Amplifier Unit connector until it locks.
Removal Method
When disconnecting the Sensor Head, hold the connector ring and the Amplifier Unit
connector and pull them straight out.
ZX-E
34
Operation Manual
Do not touch the terminals inside the connector.
Do not pull only on the connector ring, because the input cable of the Amplifier Unit may be dam-
aged.
Connector ring
All settings on the Amplifier Unit will be cleared when the Sensor Head is replaced with a differ-
ent model.