Digital Displays - Omron ZW-XC7 User Manual

8-3 Digital Displays

The theme displayed on the main or sub-display varies depending on the currently selected operating mode.
The following table lists the theme displayed, when turning the Sensor Controller ON, or in the RUN or FUNC
mode.
Operation mode Main display (upper line, in red)
When turning ON The Sensor Controller model name, "ZW-7" appears. During the initialization, "INIT" is displayed.
The system enters the RUN mode after displaying "INIT" for a few seconds.
RUN mode The task measurement result appears.
The task to display can be toggled.
Press and hold the
FUNC mode Press the
function names in descending or ascending order.
Alphebetical and symbolic notation
Alphabet characters and symbols are displayed on the main and sub-display as follows:
A B C
A B C D E F G H I J
N O P
N 0 P Q R S T U V W X Y Z
- / %
- / *O
186

Digital Displays

Changing Display Details p.192
key for two seconds or more to switch between the RUN and FUNC modes.
/ keys to cycle through the
D E F G
Q R S T
Sub-display (lower line, in green)
Press the / key to cycle through the sequence
of the HIGH and LOW threshold values, analog output
(voltage/current), judgment result, resolution (the max. and
min. values for 1-min measured value), amount of emitted
light, distance (Sensor Head to the object to measure),
effective bank, displayed task, in descending or ascending
order. Online status, Link status, Tag link status, Internal
logging status, and Amount of received light in descending
or ascending order.
When reaching the lowest layer, the setting value
displayed on the main display appears.
H I J K
U V W X
L M
L M
Y Z
ZW-7000 User's Manual