Digital Displays - Omron ZW-8000 Series User Manual

7-4 Digital Displays

The theme displayed on the main or sub-display varies depending on the currently selected operating mode.
The following table lists the theme displayed, when turning the Sensor Controller ON, or in the RUN or FUNC
mode.
Operation mode Main display (upper line, in white)
When turning ON The Sensor Controller model name, "ZW-8/ZW-7/ZW-
5" appears.
The system enters the RUN mode after displaying "INIT" for a few seconds.
RUN mode The task measurement result appears.
The task to display can be toggled.
Changing Display Details p.227
Press and hold the key for two seconds or more to switch between the RUN and FUNC modes.
FUNC mode Press the
function names in descending or ascending order.
Alphebetical and symbolic notation
Alphabet characters and symbols are displayed on the main and sub-display as follows:
A B C D
A B C D E F G H I J
N O P Q
N 0 P Q R S T U V W X Y Z
Resol
- / %
ution
- / *O
ZW-8000/7000/5000
User's Manual
/ keys to cycle through the
E F G
R S T
Sub-display (lower line, in green)
During the initialization, "INIT" is displayed.
When starting, after "START", a progress bar is displayed.
It takes about ten seconds for "START" to be displayed.
Press the / key to cycle through the sequence
of the HIGH and LOW threshold values, analog output
(voltage/current), judgment result, resolution (the max. and
min. values for 1-min measured value), amount of emitted
light, distance (Sensor Head to the object to measure),
effective bank, displayed task, in descending or ascending
order. Online status, Link status, Tag link status, Internal
logging status, and Amount of received light in descending
or ascending order.
When reaching the lowest layer, the setting value
displayed on the main display appears.
H I J K
U V W X
L M
L M
Y Z

Digital Displays

223