Omron ZX-E Operation Manual page 37

Calculating Units
Use a Calculating Unit to connect Amplifier Units when making calculations between
Amplifier Units and to prevent mutual interference between Sensor Heads.
The number of Amplifier Units that can be joined depends on the functions being used.
Function
Calculation
Mutual interference prevention
Provide power to all connected Amplifier Units.
Connection Method
1.
Open the connector covers on the Amplifier Units.
Open the connector covers by lifting and sliding them open.
2.
Mount the Calculating Unit to the DIN Track.
3.
Slide and connect the Calculating Unit to the Amplifier Unit connector.
4.
Slide and connect the second Amplifier Unit to the Calculating Unit connector.
Perform the above operation in the reverse order to remove Calculating Units.
PREPARATIONS FOR MEASUREMENT
No. of Connectable Amplifier Units
2
5
Section 2
ZX-E
35
Operation Manual