Entering Adjustment Value for 50% Position
4.
Move the sensing object to the 50% position.
5.
Use the LEFT and RIGHT Keys to display
D050.
6.
Press the ENT Key.
The sub-display will show OK and the adjustment value
will be registered.
Press the ENT Key again to reinput the adjust-
ment value.
Entering Adjustment Value for 100% Position
7.
Move the sensing object to the 100% posi-
tion.
8.
Use the LEFT or RIGHT Keys to display
D100.
9.
Press the ENT Key.
The sub-display will show OK and the adjustment value
will be registered.
Press the ENT Key again to reinput the adjust-
ment value.
Section 3
BASIC OPERATION
50%
Rated measure-
ment distance
100%
Rated measure-
ment distance
ZX-E
Operation Manual
57