Table of Contents
Advertisement
5-3
Standard Slave Settings
Clicking the Slave I/O Tab displays the window for setting a Standard Slave I/O assembly that is necessary
for operating the NE1A-SCPU01 as a Standard Slave. The I/O assembly set here is displayed and can be
selected in the Connection Setting Window of, for example, the DeviceNet Unit for a CS/CJ-series PLC that
is a Standard Master.
The I/O tags defined in the I/O assembly can be used in the Logic Editor.
Note: When the NE1A-SCPU01 is not used as a Standard Slave, it is not necessary to set the parameters
in this window.
5-3-1
Registering I/O Assemblies for Standard Slaves
Register the I/O assemblies for the Standard Slave to be used when the NE1A-SCPU01 functions as a Stan-
dard Slave.
The following information is displayed in this window.
Item
Name
Type
Size
You can add, change, and delete I/O assemblies for a Standard Slave in this window. Input assemblies and
output assemblies can be registered for each standard connection.
•
To add an I/O assembly, click the New Button. The I/O Assembly Setting Window will be displayed.
Refer to 5-3-3 Setting Assembly Data (page 88) to define the I/O assembly data.
•
To change the I/O assembly data, select the I/O assembly you want to change and click the Edit Button.
The I/O Assembly Setting Window will be displayed. Refer to 5-3-3 Setting Assembly Data (page 88) to
define the I/O assembly data.
•
To delete the I/O assembly, select the I/O assembly you want to delete and click the Delete Button.
5-3 Standard Slave Settings
Information Displayed
The registered I/O assembly name (
(
icon) are displayed.
The input/output type for the I/O assembly and data types for the I/O tags are displayed.
I/O assembly size and the sizes of I/O tags are displayed.
icon) and I/O tags name defined in the assembly
87
Advertisement
Table of Contents
