Omron DEVICENET SAFETY - CONFIGURATION MANUAL 05-2005 System Configuration Manual page 123

Monitoring Using the Network Configurator
The user can monitor run hours in the General Status using any of the following methods:
(1) Select a device and select Device - Maintenance Information from the menu bar.
(2) Select a device and click the Maintenance Information Button on the toolbar.
(3) Right-click a device and select Maintenance Information from the pop-up menu.
(4) Select a device and select Device - Monitor from the menu bar. Click the Maintenance Tab in the dis-
played window.
(5) Select a device and click the Monitor Device Button on the toolbar. Click the Maintenance Tab in the
displayed window.
(6) Right-click a device and select Monitor from the pop-up menu. Click the Maintenance Tab in the dis-
played window.
7-2 Maintenance Functions of DST1-series Safety I/O Terminals 121