Ceds File Management; Installing Eds Files - Omron DEVICENET SAFETY - CONFIGURATION MANUAL 05-2005 System Configuration Manual

C EDS File Management
This section describes the managing the EDS file used in the Network Configurator.
C-1

Installing EDS Files

EDS File - Install
Installing an EDS file enables the Network Configurator to support a new device type.
Use the following procedure to install an EDS file.
1. Select EDS File - Install.
The following window will be displayed.
2. Select the EDS file to install. The device information will be displayed in the lower part of the window.
3. Click the Open Button.
The file will be added to the Hardware List Window as new hardware.
If the same hardware already exists, it will be updated to the latest version.
If the hardware version is different, it will be added to the Hardware List in the following way.
C-1 Installing EDS Files 161