Table of Contents
Advertisement
7-1-3
Monitoring Parameters
Description
The I/O status of a NE1A-SCPU01 or DST1-series Safety I/O Terminal can be monitored using the Network
Configurator. If the configuration fails or if an error occurs in any I/O, monitoring this information enables the
user to determine the cause of the error.
Monitoring Using the Network Configurator
The user can monitor the parameters using any of the following methods:
(1) Select a device and select Device - Monitor from the menu bar. Click the Parameters Tab in the dis-
played window.
(2) Select a device and click the Monitor Device Button on the toolbar. Click the Parameters Tab in the
displayed window.
(3) Right-click a device and select Monitor from the pop-up menu. Click the Parameters Tab in the dis-
played window.
Test Output Terminal Status
Item
Test Output Value
Test Output Status
Reason for Test Output
Alarm
Safety Input Terminal Status
Item
Safety Input Value
Safety Input Status
Safety Input Logical Value Logical value from the evaluation result
Reason for Safety Input
Alarm
7-1 Monitoring Functions
Description
Output value of the test output.
Evaluation result of the test output. "Alarm" is displayed if an error occurs.
The cause of the error is displayed.
Description
Input value to the safety input.
Evaluation result of the single-channel safety input. "Alarm" is displayed if an
error occurs.
The cause of the error is displayed.
115
Advertisement
Table of Contents
