Toyota 7FG35 Operator's Manual page 10

SAS warning lamp
(SAS models)
When the ignition switch is turned on, this lamp
should come on. After the engine has started up,
the SAS warning lamp should go out. Then, the
SAS may be deemed operating normally.
If this warning lamp falls in any of the cases
referred to below, the system may be deemed
abnormal. Then, receive an inspection by a
Toyota dealer.
• The SAS warning lamp does not come on even
if the ignition switch is turned on.
• The SAS warning lamp may blink while the
vehicle is running.
Caution
Do not use the vehicle with the SAS left ab-
normal. If so, it may lead to a hazard. Once
the warning lamp has begun to blink, discon-
tinue the operation in progress and park the
vehicle at a safe location. Then, ask a Toyota
dealer for an inspection.
Swing lock indicator lamp
(SAS models)
When the ignition switch is turned on, this lamp
should come on. After the engine has started up,
the SAS warning lamp should go out. Then, the
SAS swing lock cylinder may be deemed oper-
ating normally. This tells the operator that the
vehicle is supported with four front and rear
wheels, with swing lock cylinder locked by the
SAS feature.
This lamp will go out when the swing lock cyl-
inder is unlocked.
Mini lever warning lamp
(Option)
When the ignition switch is turned ON, this lamp
comes on, and goes out after two seconds. This
suggests that the mini lever function is working
normally. If the mini lever function becomes
abnormal, the lamp comes on to inform the
operator.
If the mini lever warning lamp shows the
following states, there may be some problem
with the system. Please ask your Toyota dealer
for inspection.
• The lamp does not come on even though the
ignition switch is turned ON.
• The lamp comes on during operation.
Caution
Continuous operation with a malfunction of
the mini lever may lead to a hazard. When
the warning lamp comes on, stop the
operation, park the vehicle at a safe location,
and ask your Toyota dealer for an inspection.
Torque converter oil temperature
gauge (Torque converter model: Option)
Indicates the torque converter oil temperature.
1. Operates when the ignition switch is on.
2. Indicates the green zone if the oil tempera-
ture is normal during operation.
3. If, during operation, the gauge indicates the
red zone, please stop the operation, inspect the
oil level, and add oil if insufficient. (See the
torque converter oil inspection section for the
methods for inspection and addition.)
4. If the gauge indicates the red zone white the
torque converter oil level is proper, ask a Toyota
dealer for inspection.
Speedometer
(Option)
The speedometer indicates the speed of the ve-
hicle in km/h.
Please operate the vehicle at a safe speed.
9
En