Toyota 7FG35 Operator's Manual page 24

Adding engine oil
1. To supply oil, remove the filler cap and pour
oil through the filler port. Never let the oil level
exceed the F line.
2. The oil to be supplied must be appropriate
for the season.
SAE 40 Ambient temperature
higher than 30°C (86°F )
SAE 30 Ambient temperature
0°C to 30°C (32°F-86°F )
SAE 20 Ambient temperature
-10°C to 0°C (14°F-32°F )
Caution
Always use the same brand of oil if possible.
Leakage inspection
Check the engine compartment for any oil or
fuel leakage.
Clean the radiator if it is clogged and check if
there are any foreign objects, such as paper or
other, onto the radiator grill.
q
w
q Brake pedal
w Brake pedal floor clearance
On board vehicle inspection
Brake pedal inspection
Note: Since power brake is adopted in 3.3-5.0
ton models, the brake pedal must be inspected
after starting the engine.
1. Depress the brake pedal fully, and check the
floor clearance (clearance between the pedal and
floor).
Note: See the service data section for the floor
clearance.
2. Make sure that the pedal does not go any fur-
ther when it is kept depressed.
3. Also check that no abnormality is observed
with pedal depression and return.
4. Manually depress the brake pedal to check
the play until a resistance is felt.
Note: See the service data section for the value
of brake pedal play.
Warning
Ask a Toyota dealer for inspection if the play
is excessive, pedal movement is abnormal or
brake performance is improper.
Parking brake inspection
1. Check the operating force required for pull-
ing the parking lever fully.
Note: See the service data section for the oper-
ating force.
Warning
Ask a Toyota dealer for inspection if any ab-
normality is found.
23
En En En En En En En En En En En En En En En