Toyota 7FG35 Operator's Manual page 43

42
Removing the LPG Tank
1. Stop the engine according to instructions for
"Parking for a long time".
(1) Turn the LPG tank outflow valve clockwise
to shut the fuel supply.
(2) Let the engine stop naturally. Turn the fuel
switch to the " " ( OFF ) position.
2. Turn the pipe valve clockwise to shut it.
3. Disconnect the piping from the LPG tank
(turn the screw counterclockwise ).
4. Turn the stopper knob (located on the right
side tank bracket) counterclockwise, and remove
the LPG tank bracket stopper.
5. Turn the tank bracket backwards around its
left end, and fix it in that position with a set pin.
6. Unlock the set pin on the right side of the
tank bracket by lifting it, turn the bracket rear-
ward, and fix the set pin.
7. Pull the set pin on the lower side of the tank
bracket for unlocking. The tank bracket falls.
Lower the tank bracket and fix the lock pin.
Warning
• When unlocking the tank bracket set pin,
never enter the area under the tank bracket.
Pay special attention as the tank bracket falls
due to its own weight.
• Never unlock the set pin when the tank is
full. Otherwise, the tank bracket falls rapidly
to cause a dangerous state.