Toyota 7FG35 Operator's Manual page 12

q
3
4
w
q Forward e Low speed
w Reverse r High speed
q
w
q Forward
w Reverse
Gear shift levers
(Clutch models)
Forward-reverse gear shift lever (right-hand
side)
Lever for shifting between forward and reverse.
Forward ..................... Push the lever forward.
Reverse .................... Pull the lever backward.
The neutral position is halfway between the for-
ward and reverse positions.
Caution
(For vehicle equipped with optional Neutral
Safety Switch)
The engine cannot be started unless the shift
lever is at the neutral position.
Stop the vehicle before shifting between for-
ward and reverse.
High-low speed gear shift lever (left-hand side)
Lever for shifting of the traveling speed between
the low (1st) speed and high (2nd) speed.
Low speed .................. Push the lever forward.
High speed ............... Pull the lever backward.
The neutral position is halfway between the high
and low speed positions.
Caution
• Bring the vehicle to a perfect stop before
operating the Forward-reverse shift lever.
• Always set the levers at the neutral posi-
tions before starting the engine.
• The engine cannot be started unless the gear
shift lever is at the neutral position.
Control lever
(2 speed torque converter models)
Lever for shifting between forward and reverse.
Forward 2nd speed ... Push two step forward.
Reverse 1st speed ...Pull one step backward.
The neutral position is halfway between the for-
ward and reverse positions.
Caution
The engine cannot be started unless the con-
trol lever is at the neutral position.
Stop the vehicle before shifting between for-
ward and reverse.
q
w
q Forward
w Reverse
q
q Push
q
w
q Raise
w Lower
Control lever
(Torque converter models: Option)
Lever for shifting between forward and reverse.
Forward ..................................... Push forward
Reverse .................................... Pull backward
The neutral position is halfway between the for-
ward and reverse position.
Caution
The engine cannot be started unless the con-
trol lever is at the neutral position.
Stop the vehicle before shifting between for-
ward and reverse.
Horn button
Press the button in the center of the steering
wheel to sound the horn.
The horn will sound even when the ignition
switch off.
Lift lever
Raises and lowers the forks.
Raise ......................................... Pull backward
Lower ......................................... Push forward
The lifting speed can be adjusted by the degrees
of accelerator pedal depression and lever oper-
ating stroke.
The lowering speed can be adjusted only by the
degree of lever operating stroke.
Note: As long as the engine is killed, the fork
does not move down even if so operated on the
models using SAS.
11
En