Toyota 7FG35 Operator's Manual page 15

q Forward/backward position adjustment knob
q Height position adjustment knob
14
Mini-lever box
(Option)
Before operating the vehicle, adjust the mini-
lever box until the correct operating posture that
matches that of the operator is reached.
1. Forward/backward position adjustment
Loosen the forward/backward position
adjustment knob in a clockwise direction and
wiggle back and forth to move.
2. Height position adjustment
Loosen the height position adjustment knob in
a clockwise direction and wiggle up and down
to move.
Caution
• When adjusting the forward/backward
position and height position, be sure to loosen
the knob and secure the mini-lever box. If the
knob becomes loose during operation, an
operational mistake could occur.
• Do not adjust the position of the mini-lever
box during traveling or material handling
operation.
w
e
q
r
q Lock
w Release
e Release Knob
r Grip
Mini-lever box release lever
(Cabin specification models)
To release the engine hood, backwardly tilting
the mini-lever box is necessary. This lever is used
for the operation.
1. Lower the release lever to release the lock.
2. Tilt the mini-lever box backwardly and raise
the release lever to fix the box.
Warning
Driving the vehicle without firmly fixing the
mini-lever box is very dangerous. Please make
sure that the release lever is locked before
traveling.
Parking brake lever
When parking, grasp the grip of the lever and
fully pull it toward you.
When releasing the brake push in the release
knob check that the pawl moves away from the
sector and then push back the lever.
While operation the parking brake lever, keep
the brake pedal fully depressed.
Warning
• Never hold the lever at other than the grip
because a finger may be pinched.
When releasing the parking brake by hold-
ing the lever for starting on a slope for exam-
ple, hold the grip at above the protrusion.
• When parking on a slope, apply wheel
chocks to the wheels.
• Traveling without releasing the brake will
spoil the brake performance.