Netware; Information Checklist - Xerox WorkCentrePro 123 System Administration Manual

3 NetWare

This chapter explains how to install the machine onto a NetWare network. The following
information is provided.
Information Checklist – page 41
NetWare Environments – page 42
NetWare Installation – page 43
Installation Procedure – page 43
Network Communication Setup – page 43
NetWare Setup – page 44
Workstation Setup – page 45
Test Print – page 45

Information Checklist

Before installing the machine onto a network, make sure that the following items are
available or have been performed.
An existing operational NetWare network is required. These procedures
are not designed to install a NetWare network.
NetWare versions 3.x, 4.x, 5.x or 6.x.
Obtain and record the following information, if required:
• IP address
• Gateway address
• Subnet mask
• Host name
Refer to the glossary for additional information about the Gateway
Address and Subnet mask, if needed.
Test the machine to make sure that it is installed fully and functioning
correctly.
Install the print driver.
If problems arise during the machine installation, refer to the Problem Solving chapter
for assistance.
CAUTION: Do not connect the network cable to the machine until instructed to
do so.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide
Item By
Customer
Customer
Customer
Customer
Customer
41