Enabling Or Disabling Auxiliary Access - Xerox M20/M20i User Manual

Enabling or Disabling Auxiliary Access

Auxiliary Access allows a foreign interface board to be recognized. Use these instructions to
enable or disable Auxiliary Access:
1
!
2
!
!
3
!
!
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Press the [Machine Status] key.
Using the Navigation Keys select
[System Admin Tools] and press
[Enter].
If the System Admin Tools have
already been passcode
protected, type in the password
and press [Enter].
Select [Auxiliary Access] and
press [Enter].
To enable Auxiliary Access,
select [On] is displayed and press
[Enter]. Otherwise, select [Off]
and press [Enter].
Enter
System Admin Tools
[Passcode Protect]
System Admin Tools
[Auxiliary Access]
Machine
Status
Page 9-31