Managing Departments - Xerox COPYCENTRE M20I User Manual

Managing Departments

This setting is used to enable or disable Department Mode and to clear Department data and
codes.
1
2
3
4
Page 9-18
Press the [Machine Status] key.
Using the Navigation Keys select
[System Admin Tools] and press
[Enter].
If the System Admin Tools have
already been passcode
protected, type in the password
and press [Enter].
Select [Department] using the
Navigation Keys is displayed and
press [Enter].
Enter the Master Access Code.
The first time that you access
Department, you will be
prompted to enter a master
access code then re-enter it to
confirm the code.
Select [Management] using the
Navigation Keys and press
[Enter].
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
System Admin Tools
[Passcode Protect]
System Admin Tools
[Department]
Department
[Management]