Handling And Installation; Instructions And Warnings For Handling And Installation; Packaging And Unpacking; 3433210_Inst_Gb - Angelo Po 0N1CP1GL User Manual

ENGLISH

HANDLING AND INSTALLATION

INSTRUCTIONS AND WARNINGS FOR HANDLING AND INSTALLATION

NOTE: Read the following sections of
the "User instruction manual" carefully be-
fore performing any handling and installa-
tion operations:
– Hazards and safety provisions during trans-
port.
– Hazards and safety provisions during assem-
bly.
– Hazards and safety provisions during instal-
lation, commissioning, adjustments and part
replacement
WARNING: All handling and installa-
tion operations shall be carried out in accor-
dance with current legislation on health and
safety at work.
The packaging is designed to reduce space and
as appropriate to the type of transport used.To
simplify transport, some components may be
removed and suitably protected and packed
for transport. The packaging carries all informa-
tion necessary for loading and unloading.
When unpacking, check that all components
are present in the correct quantities and are
undamaged.
The packaging material must be properly dis-
posed of in accordance with legal require-
ments.
Diff erent means of transport may be used, de-
pending partly on the destination.
The chart shows the most commonly used al-
ternatives.
During transport, fi x the packaging to the
means of transport securely to prevent unde-
sirable shifting.
8
If necessary, the person authorised to car-
ry out these operations should organise a
"safety plan" to protect the people directly
involved.
tions (water, electricity and gas) must be set
up exclusively by suitably qualifi ed staff , in
accordance with local requirements.

PACKAGING AND UNPACKING

TRANSPORT

HANDLING AND INSTALLATION
WARNING: The necessary connec-
Means of transport
Lifting equipment

3433210_inst_GB