HANDLING AND INSTALLATION
INSTRUCTIONS AND WARNINGS FOR HANDLING AND INSTALLATION
WARNING: Read the following sections of the "User instruction manual" carefully before
performing any handling and installation operations:
– Hazards and safety provisions during transport.
– Hazards and safety provisions during assembly.
– Hazards and safety provisions during installation, commissioning, adjustments and part replacement.
WARNING: When handling and installing the appliance comply with the information pro-
vided by the manufacturer directly on the packaging, on the appliance and in the instructions
for use . All handling and installation operations should be carried out in accordance with current
legislation on health and safety at work .
IMPORTANT: Take care not to knock or drop the appliance during transport, handling and
installation, to avoid damage to its components .
WARNING: Installations and/or repairs carried out by unauthorised staff or with non-ori-
ginal parts, as with any technical change that is not approved by the manufacturer, will void the
warranty and relieve the manufacturer of any liability for damage to the product .
The packaging is designed to reduce space and as
appropriate to the type of transport used.
To simplify transport, some components may be re-
moved and suitably protected and packed for tran-
sport.
The packaging carries all information necessary for
loading and unloading.
When unpacking, check that all components are pre-
sent in the correct quantities and are undamaged.
The packaging material must be properly disposed
of in accordance with legal requirements.
Different means of transport may be used, depen-
ding partly on the destination.
The chart shows the most commonly used alterna-
tives.
During transport, fix the packaging to the means of
transport securely to prevent undesirable shifting.
3338970_inst_GB_rev.1
HANDLING AND INSTALLATION
PACKAGING AND UNPACKING
TRANSPORT
ENGLISH
Lifting equipment
means of transport
7