Fault; Handling And Installation - Angelo Po 20N1SCP User Manual

TROUBLESHOOTING
The appliance has been tested before being put
into service.
The information provided below is intended to as-
sist in the identification and correction of any anom-
alies and malfunctions which might occur during
use.
Faults
The appliance does not switch on
The basket does not get up or goes down

HANDLING AND INSTALLATION

RECOMMENDATIONS FOR HANDLING AND INSTALLATION
Important
When handling and installing the appliance
comply with the information provided by
the constructor directly on the packaging,
on the appliance and in the instructions for
use.

FAULT

The user can solve some of these problems him-
self, but for others specific technical knowledge or
skill is required, and so they must only be carried
out by qualified staff with recognised experience ac-
quired in the specific sector of operation.
Causes
Electrical connection not made correctly
Fuse "blown"
Electronic circuit board damaged
Drum motor defective
Power supply unit defective
If necessary, the person authorised to carry
out these operations must organise a "safe-
ty plan" to protect the people directly in-
volved.
- 11 -
Remedies
Check the connection of the electri-
cal wires
Important
Contact the after-sales service
Extract the fuse-holder and replace
the damaged fuse
Replace the electronic circuit board
Important
Contact the after-sales
service
Replace drum motor
Important
Contact the after-sales service
Replace power supply unit
Important
Contact the after-sales service
6
IT
GB
DE
FR
ES
7
English