ENGLISH
Even if the equipment has all its safety devices,
if necessary, during the installation and connec-
tion other safety devices may be supplemented
in accordance with applicable laws.
The illustration shows the position of the de-
vices.
Gas supply tap: for turning the connection
A)
to the gas supply line on and off .
Safety thermocouple: cuts out the gas
B)
supply if the fl ame goes out.
Safety thermostat: stops gas supply in case
C)
of dry operation.
WARNING: Make a daily check that
the safety devices are properly installed and
in good working order.
The illustration shows the position of the signs
provided.
Nameplate with manufacturer and applian-
A)
ce data .
WARNING:read the manual careful-
B)
ly before carrying out any procedure.
WARNING: when washing the ap-
C)
pliance do not point pressurised water jets
at internal parts.
WARNING: all relevant regulations
D)
must be complied with. "No liability is ac-
cepted in case of failure to comply with the
installation and commissioning instruc-
tions".
WARNING: all relevant regulations
E)
must be complied with. "Install in complian-
ce with the relevant regulations and use in
well ventilated premises only".
WARNING: watch out for hot surfa-
F)
ces.
4
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
C
B
C
B
D
E
H
37M3162
L
CE marking: this indicates that the equip-
G)
ment is compliant with all relevant laws ap-
plicable to the product.
WARNING: dry operation is forbid-
H)
den.
WARNING: drain the well comple-
L)
tely after use.
SAFETY
A
C
B
F
37M3202
G
A
3433210_ut_GB