Handling And Installation; Instructions And Warnings For Handling And Installation; Packaging And Unpacking; Transport - Angelo Po 0N1CP1EL User Manual

HANDLING AND INSTALLATION

HANDLING AND INSTALLATION

INSTRUCTIONS AND WARNINGS FOR HANDLING AND INSTALLATION

NOTE: Read the following sections of
the "User instruction manual" carefully befo-
re performing any handling and installation
operations:
– Hazards and safety provisions during trans-
port.
– Hazards and safety provisions during assem-
bly.
– Hazards and safety provisions during instal-
lation, commissioning, adjustments and part
replacement
WARNING: All handling and installa-
tion operations shall be carried out in accor-
dance with current legislation on health and
safety at work .
The packaging is designed to reduce space and
as appropriate to the type of transport used.To
simplify transport, some components may be re-
moved and suitably protected and packed for

transport.

The packaging carries all information necessa-
ry for loading and unloading. When unpacking,
check that all components are present in the cor-
rect quantities and are undamaged.
The packaging material must be properly dispo-
sed of in accordance with legal requirements.
Different means of transport may be used, de-
pending partly on the destination.
The chart shows the most commonly used al-
ternatives. During transport, fix the packaging
to the means of transport securely to prevent
undesirable shifting.
3320040_inst_GB_rev.3
If necessary, the person authorised to car-
ry out these operations should organise a
"safety plan" to protect the people directly
involved .
(water, electricity and gas) must be set up ex-
clusively by suitably qualified staff, in accor-
dance with local requirements .

PACKAGING AND UNPACKING

TRANSPORT
WARNING: The necessary connections
Means of transport
ENGLISH
Lifting equipment
7