Handling And Installation; Instructions And Warnings For Handling And Installation; Packaging And Unpacking; Transport - Angelo Po 1S1PI1E Manual

HANDLING AND INSTALLATION

HANDLING AND INSTALLATION

INSTRUCTIONS AND WARNINGS FOR HANDLING AND INSTALLATION

NOTE: Read the following sections of
the "User instruction manual" carefully be-
fore performing any handling and installa-
tion operations:
– Hazards and safety provisions during trans-
port .
– Hazards and safety provisions during assembly .
– Hazards and safety provisions during instal-
lation, commissioning, adjustments and part
replacement
WARNING: All handling and instal-
lation operations shall be carried out in ac-
cordance with current legislation on health
and safety at work .
The packaging is designed to reduce space and
as appropriate to the type of transport used . To
simplify transport, some components may be
removed and suitably protected and packed
for transport .
The packaging carries all information necessary
for loading and unloading operations .
When unpacking, check that all components
are included in the correct quantities and are
undamaged .
The packaging material must be properly dis-
posed of in accordance with legal require-
ments .
Different means of transport may be used, de-
pending partly on the destination .
The chart shows the most commonly used al-
ternatives . During transport, fix the packaging
to the means of transport securely to prevent
undesirable shifting .
3413990_inst_GB
If necessary, the person authorised to car-
ry out these operations should organise a
"safety plan" to protect the people directly
involved .
tions (water, electricity and gas) must be set
up exclusively by suitably qualified staff, in
accordance with local requirements .

PACKAGING AND UNPACKING

TRANSPORT

WARNING: The necessary connec-
Means of transport
ENGLISH
Lifting equipment
7