Fault; Troubleshooting; Handling And Installation; Instructions And Warnings For Handling And Installation - Angelo Po 1N1BR2G User Manual

ITALIANO
See paragraph "TROUBLESHOOT" of the User
instructions manual.

HANDLING AND INSTALLATION

INSTRUCTIONS AND WARNINGS FOR HANDLING AND INSTALLATION

NOTE: Read the following sections of
the "User instruction manual" carefully be-
fore performing any handling and installa-
tion operations:
– Hazards and safety provisions during trans-
port.
– Hazards and safety provisions during assem-
bly.
– Hazards and safety provisions during instal-
lation, commissioning, adjustments and part
replacement.
The packaging is designed to reduce space and
as appropriate to the type of transport used.To
simplify transport, some components may be re-
moved and suitably protected and packed for
transport. The packaging carries all information
necessary for loading and unloading. When un-
packing, check that all components are present
in the correct quantities and are undamaged.
The packaging material must be properly dispo-
sed of in accordance with legal requirements.
Diff erent means of transport may be used, de-
pending partly on the destination.
The chart shows the most commonly used alter-
natives.
During transport, fi x the packaging to the me-
ans of transport securely to prevent undesirable
shifting.
8

FAULT

TROUBLESHOOTING

tion operations shall be carried out in accor-
dance with current legislation on health and
safety at work. If necessary, the person au-
thorised to carry out these operations should
organise a "safety plan" to protect the people
directly involved.
(water, electricity and gas) must be set up ex-
clusively by suitably qualifi ed staff , in accor-
dance with local requirements.

PACKAGING AND UNPACKING

TRANSPORT

WARNING: All handling and installa-
WARNING: The necessary connections
Means of transport
FAULT
Lifting
equipment
3301311_inst_GB_rev.1