Hazards And Safety Provisions During Appliance; Decommissioning - Angelo Po 0N1CP1GL User Manual

ENGLISH
HAZARDS AND SAFETY PROVISIONS DURING APPLIANCE DECOMMISSIONING
When decommissioning the appliance, watch out for the following hazards and provide for the
countermeasures indicated below:
► Source of hazard: Electric power
Hazard
Risk of electric
shock caused by
live components
► Source of hazard: Handling of heavy loads Source of hazard:
Hazard
Risk of injury due
to body overload
► Risk generated by materials/substances
Hazard
Concentration
of unburned gas
emissions due to an
incorrect appliance

decommissioning

12
Where or in which situations
does the hazard occur?
• On the power cable
• Under protective panels
• Under the control panel
• Under protection covers
Where or in which situations
does the hazard occur?
When the appliance moves • Use a suitable lifting
Where or in which situations
does the hazard occur?
During appliance decom-
missioning
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qualifi ed
staff only, in accordance with
the relevant applicable laws.
• Specialist procedure
• Turn off the power supply
before removing the covers
• Secure it to prevent acciden-
tal switching on
• Ensure that there is no volt-
age
Countermeasures
device
• observe the limit values
for lifting and transport
• Wear personal protective
equipment
Countermeasures
Decommissioning opera-
tions must be carried out
by qualifi ed personnel
SAFETY
Safety device
• Protection
panels
• System
switch-dis-
connector
Safety device
• Protective gloves
• Protective shoes
• Safety helmet
(e.g. for sus-
pended loads,
overhead opera-
tions...)
Safety device
None
3433210_ut_GB