Hazards And Safety Provisions During Use - Angelo Po 0N1CP1GL User Manual

ENGLISH
Hazard
Risk of electric
shock caused by
live components
Risk of electric
shock caused by
live parts

HAZARDS AND SAFETY PROVISIONS DURING USE

When using the appliance, watch out for the following hazards and provide for the countermea-
sures indicated below:
► Source of hazard: heat
Hazard
Flammable mate-
rial placed on the
evacuation area
Contact with hot
working surfaces
Scalding caused by
hot liquids
8
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
• On the appliance and on
the adjacent metal parts
• On the appliance and on
the adjacent metal acces-
sories
Where or in which situations
does the hazard occur?
In case of blocked fl ue
Accidental contact
Tampering with the drip
tray or fat collection
drawer
Countermeasures
• Disable the power supply
before removing the pro-
tections
• Prevent the appliance from
being powered acciden-
tally.
• Ensure that there is no volt-
age
• Before commissioning the
appliance, check that all
electric connections are not
damaged
• Use a power supply cable
with the specifi cations in-
dicated in section "Electrical
connection" of the installa-
tion manual.
• Before appliance commis-
sioning, check that electrical
connections are securely fi xed
• Before commissioning,
make sure that the appliance
and its metal accessories are
connected to a system for
equipotential bonding
Countermeasures
• Training of personnel
• Training of personnel and
warning plate in place on
the appliance and in the
user manual
• Training of personnel
SAFETY
Safety device
• Protection
panels
• System
switch-dis-
connector
Equipoten-
tial bonding
system
Safety device
None
None
None
3433210_ut_GB